0%

Thank you for purchasing your TRA Quick Clickers from Bikeman Performance! Quick Clickers are a bolt-on product that takes about 15 minutes to install.

(Follow the guidelines below)

IMPORTANT - Read the entire instructions before proceeding. If any of it does not make sense or is not in your skillset, please have an experienced technician perform the install.

 

1 - Remove the Exhaust valve assemblies from the cylinders and pull the cap apart from the valve guide. This exposes the Allen head bolt holding the valve stop onto the valve.

2 - Remove the Allen head bolt and valve stop from the end of the valve.

3 - Slide the BMP Valve Spacer onto the valve and reinstall the stop and Allen head bolt.

4 - The cables will need to be readjusted due to the spacers. Do so, after the motor is running, rev the motor to over 6800RPM to open the valves and cycle the valve motor. You can then tighten the cable adjusters until there is no slack left in the cables. Be careful not to over-adjust the cables.

 

 

Disclaimer

As defined by the Magnuson-Moss Warranty Act. Do not install any performance parts or services unless you have the technical ability to properly set up the entire machine to compensate for the installation of those parts. References in most of our literature to “bolt-on-parts” only indicate the parts are removable from the machine. It is not meant to imply that the parts can be installed without additional modifications. The necessary work and expertise needed to install different product varies. Instructions, where provided, are given to assist in installation only; they are not a substitute for mechanical experience in setting up racing vehicles. References to performance gains, reliability, ease of installation, etc. are bases on our and outside customer’s experiences. This is not a guarantee of similar performance in every installation. While we sell proven products, in the end, it’s up to the individual to make the most of the product. Bikeman Performance Plus is not responsible for any personal or property damages caused by this product.